Moxa Technologies EDS-726 user manual Configuring Turbo Ring

EDS-726 Series User’s Manual Featured Functions

Configuring Turbo Ring

Use the Communication Redundancy page to configure Turbo Ring.

	Now Active
	This field shows which communication protocol is in use: Turbo Ring, RSTP, or neither.
	Master/Slave
	This field appears only when Turbo Ring mode is selected for Redundancy Protocol. It indicates if
	this EDS-726 is or is not the Master of the Turbo Ring.
NOTE	The user does not need to set the master to use Turbo Ring, only to assign which segment serves
	as the backup path.
	The master will be determined automatically if the user does not set a dedicated master for the
	Turbo Ring.
	Redundant Port Status
	This field indicates the current status of redundant ports. The state is “Forwarding” for normal
	transmission, “Blocked” to stopped transmission if this port is the backup path, and “Link down”
	for non-connection.
	Ring Coupling
	Indicates if the Ring Coupling function is “Enabled” or “Disabled.”
	Coupling Port Status
	This field indicates the current status of coupling ports. The state is “Forwarding” for normal
	transmission, “Blocked” to stop transmission if this port is the backup path, and “Link down” for
	non-connection.
	At the bottom of the page, the user can configure this function’s “Settings.” For Turbo Ring, the
	user can configure:

3-23