Configure Voice over Wireless IP Service | 85 |
Step Summary The following list summarizes the fields selected or configuration items entered in the example that follows to configure VoWIP access:
1Create a radio profile.
From the Radio Profile wizard, enter RadioProfileVoic as the Name of the radio profile.
Click Finish.
Select the radio profile and click Properties.
Select the 802.11 Attributes and change the DTIM Period to 3.
Click OK.
2Create a Voice service profile.
From the Voice Service Profile wizard, click Next and enter
Select the Vendor (SpectraLink, Avaya, Vocera, or Other).
Click Next. Select the access type. (The examples in this section use Open Access.)
Click Next. Select the data encryption method. (The examples in this section use WPA and disable Static WEP.)
Click Next. Leave TKIP enabled and click Next.
Click Next. Type a passphrase from 8 to 63 characters long in the
Click Next. Type
Click Next. (If the device supports WMM, select WMM.)
Click Next. Select RadioProfileVoic in the Radio Profiles list.
Click Finish.
3Set up a VLAN on the WX switches.
From the Create VLAN wizard, enter
Click Next. Select the VLAN ports. Click Move to use them exclusively in this VLAN.
Click Finish.
Select the VLAN and click Properties.
Select IGMP and deselect Enabled to disable IGMP snooping.
