3Com WX2200 manual To add a floor to the building

Add Site Information 107

5In the Starting Floor Level box, specify the floor number of the first floor in the building. To start with a subterranean floor, you can specify 0 or a negative floor number.

6In the Skip Floor Levels box, specify floor numbers you want to skip. Skipping floors is useful when you want to model only certain floors in a building. To enter a list of floors, use commas to separate the floor numbers (example: 1,3,7). To enter a range, use a hyphen (example:

8-12).

7Click Finish to close the wizard.

To add a floor to the building

1In the Organizer panel, click the building name.

2Select Create Floor in the Task List panel. The Create Floor wizard prompts you for information about the new floor.

3In the Floor Name box, type the name of the floor (1 to 60 alphanumeric characters, with no spaces or tabs), and click Next.

4To change the default attenuation for radios, type the number of dB in the 802.11a (dB) box or 802.11b/g (dB) box.

5In the Height of the Ceiling box, type the number of feet or meters from the floor to the ceiling (1 to 1000 feet or meters).

6Click Finish to close the wizard.

7When you click on the floor’s name in the Organizer panel, a view of the floor plan is displayed in the Content panel. Click on the ruler icon to set the scale of your floor.