3Com WX2200 manual Using RF AUTO-TUNING with Modelling

114CHAPTER 5: USING RF AUTO-TUNING WITH MODELLING

12To change the default WX switch model, select the model from the WX Model list.

13To change the default MAP model, select the model from the Default AP Model list.

14To change the MAP connection type, select the type from the AP Connection Type list:

„Direct—MAPs are directly attached to dedicated WX switch ports.

„Distributed—MAPs can be indirectly attached through intermediate Layer 2 or Layer 3 devices.

„Distributed (Auto)—MAPs can be indirectly attached through intermediate Layer 2 or Layer 3 devices. They receive their configuration automatically using a profile that assigns a Distributed MAP number and name to the MAP from among the unused valid MAP numbers available on the switch.

15Click Next. If you selected Direct or Distributed in the AP Connection Type list, the Redundant Connections page appears; go to step 16. If you selected Distributed (Auto) in the AP Connection Type list, the Capacity Planning for Data page appears; go to step 20.

16To plan for redundant MAP connections to WX switches, select Compute Redundancy.