3Com WX2200 manual Configure Employee Access Services

Configure Employee Access Services 55

„Configure each user record with either the VLAN-Name attribute or the RADIUS Tunnel-Private-Group-ID.

„Configure 802.1X authentication rules.

3Configure the RADIUS server in 3WXM:

„From the Create RADIUS wizard, enter sg1 as the Name of the server, the server’s IP address, and the Key. Allow the wizard to create the server group and place the server in it for you. Click Finish.

4Create a service profile for 802.1X service.

„From the 802.1x Service Profile wizard, click Next and enter Secure-802.1X-Employeesas the Name of the service profile and Employees as the SSID.

„Click Next. Select WPA and deselect Dynamic WEP.

„Click Next. Leave TKIP enabled.

„Click Next. Leave External RADIUS Server enabled. Select the RADIUS server group and click Add.

„Click Next. Enter vlan-mktas the default VLAN to use if the VLAN is not assigned by RADIUS authorization.

„Click Next. Select RadioProfile1 and click Add. Select default and click Remove.

„Click Finish.

5Set up a VLAN on the WX switches.

„From the Create VLAN wizard, enter vlan-mktas the VLAN name.

„Click Next. Select the VLAN ports. Click Add to share them with other VLANs or Move to use them exclusively in this VLAN. If you click Add, then select Tag.

„Click Finish.

Example: Configure The following detailed steps provide an example of how to configure Employee Access Employee services. You will:

„“Create a Radio Profile” on page 56

„“Configure RADIUS Servers” on page 58

„“Create a Service Profile for 802.1X Access” on page 61

„“Set Up VLANs on WX Switches” on page 66