3Com WX2200 manual Create a Service Profile for SVP VoWIP Devices

90CHAPTER 3: CONFIGURING WIRELESS SERVICES

12Click Next. Type or select the name of the VLAN you want to place voice users in. For this example, use voice-vlan.

Typing the VLAN name here does not actually configure the VLAN. To configure a VLAN, see “Set Up VLANs on WX Switches” on page 66.

13Click Next. Select Enable WMM.

14Click Next. Select RadioProfileVoic in the Radio Profiles list.

15Click Finish.

Create a Service Profile for SVP VoWIP Devices

1Select Configuration on the toolbar.

2In the Organizer panel, expand the WX switch.

3Expand Wireless, then select Wireless Services.

4In the Task List panel, select Voice Service Profile. The Voice Service Profile wizard is displayed.

5Click Next.

6Change the service profile name to Voice-SVP, and use the name SVP for the SSID.