84 CHAPTER 3: CONFIGURING WIRELESS SERVICES
Table12 Creating a Service for VoWIP Access
Task Path Primary Parameters to Configure
“Create a Radio Profile”
on page 56
1Tool bar option: select
Configuration.
2Organizer panel: expand the
WX switch.
3Expand Wireless.
4Click Radio Profiles.
5Select Radio Profile in the Task
List.
From the Create Radio Profile wizard:
Radio profile name: enter a name
For SpectraLink, from the Radio Profile Properties
dialog:
802.11 attributes: change DTIM to 3
After you create the service profile, you can map it
to the radio profile.
After you install the MAPs, you can map their radios
to the radio profile.
Note: The examples in this chapter configure the
radio profile first. However, you also can configure
the radio profile later as part of service profile
configuration.
“Create a Service Profile
for Voice” on page86
1Tool bar option: select
Configuration.
2Organizer panel: expand the
WX switch.
3Expand Wireless.
4Click Wireless Services.
5Select Voice Service Profile in
the Task List.
From the Create Service Profile wizard:
Service profile name: edit name
SSID name: enter name
SSID Type: use Clear (unencrypted)
VLAN Name: enter name
Authentication server: select LOCAL
Radio profile: select one
“Set Up a VLAN for
VoWIP on WX Switches”
on page 94
1Tool bar option: select
Configuration.
2Organizer panel: expand the
WX switch.
3Expand System.
4Click VLANs.
5Select VLAN in the Task List.
From the Create VLAN wizard:
VLAN Name: enter name
VLAN ID: select number
IP Address: enter IP Address
Ports: select them and move them to the voice
VLAN
For SpectraLink, from the VLAN Properties dialog:
IGMP: disable
SVP requires IGMP snooping to be disabled.