3Com WX2200 manual Click Next

Configure Voice over Wireless IP Service 91

7Leave SpectraLink selected in the Vendor drop-down list.

8Click Next. Select Open Access and deselect MAC Access.

9Click Next. Select WPA and deselect Static WEP.

10Click Next. Leave TKIP enabled and click Next.

11Click Next. Type a passphrase from 8 to 63 characters long in the Pre-shared Key box and click Generate.

12Click Next. Type or select the name of the VLAN you want to place SVP users in. For this example, use voice-vlan.

Typing the VLAN name here does not actually configure the VLAN. To configure a VLAN, see “Set Up VLANs on WX Switches” on page 66.

13Click Next.

14Click Next. The wizard displays the ACL that will automatically be added to the configuration by the wizard. The first rule in the ACL provides high -priority treatment of SVP traffic by marking IP protocol 119 (SVP) packets with CoS 7. The second rule permits all other traffic in the VLAN.

15Click Next. Select RadioProfileVoic in the Radio Profiles list.

16Click Finish.