106 CHAPTER 5: USING RF AUTO-TUNING WITH MODELLING
Add Site Information
By adding minimal information about your buildings and floors at your
site, you support improved monitoring for your network. You can
manually add building and floor information or you can import a floor.
For information about importing a floor plan, see “Import a Floor Plan”
on page 128.
To add site information
1Select the RF Planning tool bar option.
2In the Organizer panel, click the name of the network plan.
3Select Create Site in the Task List panel. The Create Site wizard, a series
of dialog boxes, prompts you for information about the new site.
4In the Site Name box, type a name for the site (1 to 80 alphanumeric
characters, with no spaces or tabs), and click Next.
5To change the Country Code, select the country where the network is to
be deployed in the Country Code list.
6In the Channel Set (802.11b/g) list, select the set of operating channels
for any 802.11b/g MAP radios you plan to use (if different from the
default), and click Next.
7In the Number Of Buildings box, specify how many buildings are in your
site, and click Finish.
When you specify the number of buildings a site contains, 3WXM creates
each building using the default settings. You can edit the buildings
3WXM creates or you can add new buildings.
To create a building
1In the Organizer panel, click the site name.
2Select Create Building in the Task List panel. The Create Building wizard
prompts you for information about the new building.
3In the Building Name box, type the name of the building (1 to 30
alphanumeric characters, with no spaces or tabs), and click Next.
4In the Number Of Floors box, specify how many floors the building has.
When you specify the number of floors a building contains, 3WXM
creates each floor using the default settings. You can edit the floors
3WXM creates or you can add new floors.