22CHAPTER 1: GETTING STARTED
Select the arrow buttons to change the SNMP Trap Receiver Port, which is the port on which SNMP traps are received. Also select the trap type (SNMPv1 or SNMPv3) you want 3WXM Services to receive from WX switches.
On each switch in the network plan, you must enable notifications and configure 3WXM Services as a notification target (trap receiver).
3WXM Services does not start listening for SNMP notifications from switches until you save the network plan.
From the Key Store area of the window, specify security settings.
From the Access Control area, define user accounts. For more information about access control, see “3WXM Access Control” on page 23.
(The
To change these settings, use the Service Settings tab of the 3WXM
Services Setup dialog.
To select monitoring settings
All monitoring options are enabled by default. You do not need to enable them and you do not need to specify the switches you want to monitor. However, for 3WXM Services to receive trap data from WX switches, SNMP notifications must be enabled and 3WXM Services must be configured as a notification target on each of the switches.
To start gathering data for monitoring, deploy your configuration to the network. For information about deploying your configuration, see “Deploy Your Configuration” on page 155.
