![](/images/new-backgrounds/1108508/108508231x1.webp)
116CHAPTER 5: USING RF AUTO-TUNING WITH MODELLING
23In the Station Oversubscription Ratio list, select the ratio for the average transmit behavior of the stations.
The station oversubscription ratio is the ratio of active clients compared to total clients. For example, the ratio 5:1 indicates that, statistically, 20 percent of the clients are active at any given time.
24Click Next. The Capacity Planning for Voice page appears.
25To calculate MAP placement and configuration based on both coverage and on capacity for voice over IP, enable Use Capacity Calculation for Voice. Otherwise, click Next and go to step 30.
By default, 3WXM performs only the coverage calculation. If you enable the Use Capacity Calculation for Voice option, 3WXM performs both calculations.
26In the Active Call Bandwidth list, specify the amount of bandwidth in kilobits per second (Kbps) that you expect for each call.