Moxa Technologies EDS-726 user manual Event Types, System Event, Port Event

EDS-726 Series User’s Manual Featured Functions

Event Types

Event Types can be divided into two basic groups: System Events and Port Events. System Events are related to the overall function of the switch, whereas Port Events are related to the activity of a specific port.

System Event	Warning e-mail is sent when…
Switch Cold Start	Power is cut off and then reconnected.
Switch Warm Start	EDS-726 is rebooted, such as when network
	parameters are changed (IP address, subnet mask,
	etc.).
Power Transition (OnÆOff)	EDS-726 is powered down.
Power Transition (OffÆOn)	EDS-726 is powered up.
DI1 (OnÆOff)	Digital Input 1 is triggered by on to off transition
DI1 (OffÆOn)	Digital Input 1 is triggered by off to on transition
DI2 (OnÆOff)	Digital Input 2 is triggered by on to off transition
DI2 (OffÆOn)	Digital Input 2 is triggered by off to on transition
Configuration Change Activated	Any configuration item has been changed.
Comm. Redundancy Topology	If any Spanning Tree Protocol switches have changed
Changed	their position (applies only to the root of the tree).
	If the Master of the Turbo Ring has changed or the
	backup path is activated.
Authentication Failure	An incorrect password is entered.

Port Event	Warning e-mail is sent when…
Link-on	The port is connected to another device.
Link-off	The port is disconnected (e.g., the cable is pulled out,
	or the opposing device shuts down).
Traffic-Overload	The port’s traffic surpasses the Traffic-Threshold for
	that port (provided this item is Enabled).
Traffic-Threshold (%)	Enter a nonzero number if the port’s Traffic-Overload
	item is Enabled.
	A Traffic-Overload warning is sent every
Traffic-Duration (sec.)	Traffic-Durationseconds if the average
	Traffic-Threshold is surpassed during that time
	period.

NOTE	The Traffic-Overload,Traffic-Threshold (%), and Traffic-Duration (sec.) Port Event items
	are related. If you Enable the Traffic-Overload event, then be sure to enter a nonzero
	Traffic-Threshold percentage, as well as a Traffic-Duration between 1 and 300 seconds.
NOTE	Warning e-mail messages will have sender given in the form:
	Moxa_EtherDevice_Switch_0001@Switch_Location
	where Moxa_EtherDevice_Switch is the default Switch Name, 0001 is EDS-726’s serial number,
	and Switch_Location is the default Server Location.
	Refer to the Basic Settings section to see how to modify Switch Name and Switch Location.

3-57