Moyer Diebel MH-60M3, MH-6NM3 305mm, INSTALLATION Cont, Plumbing Connections, Water Connections

INSTALLATION

INSTALLATION (Cont.)
Plumbing Connections
NOTE:
Plumbing connections must comply with
all applicable sanitary and plumbing
codes.
Water Connections	12"
1. All MH series dishwashers require a single,	[305mm]
hot water supply.
	FLOOR
The hot water connection to all MH
series dishwashers is 3/4" NPT.
The connection is made from
underneath the dishwasher.
	Figure 7
	Hot Water Connection
The following minimum water	(MH-60 Only)
	3/4" NPT
temperatures are recommended:

MH-60 with built-in 40° rise electric booster (Minimum 140°F/60°C) (Min./Max. flow pressure

20-22 PSI/138-151.8 kPa)

MH-60 with built-in 70° rise electric booster (Minimum 110°F/43°C) (Min./Max. flow pressure

20-22 PSI/138-151.8 kPa)

MH-6N without built-in booster (Minimum 180°F/70°C) (Min./Max. flow pressure 20-22 PSI/138-151.8 kPa)

MH-6L low temperature (Minimum 120°F/49°C- 140°F/60°C Optimum)

(Min./Max. flow pressure 20-22 PSI/138-151.8 kPa)

Refer to Figs. 7 and 8

12"

[305mm]

FLOOR

Figure 8

Hot Water Connection

(MH-6N, MH-6L Only)

3/4" NPT

12