Moyer Diebel MH-6NM3 Check Final Rinse Water Temperature, Check Final Rinse Water Pressure, Power

INITIAL START-UP

INITIAL START-UP (Cont.)

8

Check Final Rinse

Water Temperature

Check the final rinse water temperature during the final rinse cycle.

The final rinse water temperature gauge is located in the final rinse piping at the top of the dishwasher.

The final rinse water tempera- ture should be a minimum of

180°F/82°C for (MH-60, MH-6N). The optimum final rinse temperature for (MH-60, MH-6N) is 180-195°F/82-91°C.

The MH-6L requires a minimum final rinse temperature of 120°F/49°C.

However, a minimum final rinse temperature of 140°F/60°C is optimum for the MH-6L.

	100	150
50		200
0		250

9

Check Final Rinse

Water Pressure

The final rinse water pressure gauge should indicate a flowing pressure of 20-22 PSI/138-151.8 kPa during the final rinse cycle for all models.

A pressure reducing valve (PRV) is required if flow pressure exceeds 20-22 PSI/138-151.8 kPa.

POWER EXTENDED WASH

CYCLE

OFF

WASH RINSE PRESSURE

19