Moyer Diebel MH-6LM3 The Extended Wash Operation, Complete the initial start-up, Initial Start-Up

INITIAL START-UP

INITIAL START-UP (Cont.)

10

The Extended Wash

Operation

The extended wash switch holds the dishwasher in a continuous wash mode for cleaning heavily soiled ware.

Open and then fully close the dishwasher doors. The dish- washer will begin a wash cycle automatically.

Push the Extended wash switch UP to the extended wash position. The dishwasher will remain in

a continuous wash mode until

the switch is flipped down. The dishwasher will resume the cycle and finish with a final rinse.

11

Complete the initial start-up

POWER EXTENDED WASH

CYCLE

OFF

WASH RINSE PRESSURE

Check all the plumbing for leaks. Also, check the drain plumbing for leaks and be sure that the drain will handle the drain water flow (15 gal/min-56.8 liters/min) from the dishwasher.

After the drain and the plumbing connections are checked, turn off the dishwasher power switch.

12

Drain the dishwasher

Make sure the dishwasher power switch is turned off. Drain the dishwasher by pulling the handle of the drain-overflow assem- bly straight up. Rotate the handle 90° to lock the drain in the up position.

20