Figure 3-4

Attaching the Chute Assembly

•Remove locknuts and screws securing one of the flange keepers to the chute assembly. See Figure 3-4.

•Loosen but do not remove the locknuts and screws on the other two flange keepers.

•Slide chute assembly over chute opening, making sure the flange keepers are beneath lip of chute adapter. The notches should engage with the spiral end of the chute crank. See Figure 3-5.

•Secure flange keeper, locknuts and screws previously removed. Tighten all flange keepers and hardware with two 7/16” wrenches. Do not over tighten.

NOTE: If necessary the chute crank support bracket can be adjusted so the spiral on the chute crank fully engages the teeth on the chute assembly. Refer to the Adjustment Section.

Attaching the Shift Rod

•Align the upper and lower shift rods, then slide the shift rod connector down over the end of the lower shift rod. Tap the connector until the lower rod is completely through the connector. See Figure 3-6.

NOTE: If the connector is not properly assembled, the shift rod will pivot and you will not be able to change speeds or direction.

NOTE: If the full range of speeds (forward and reverse) cannot be achieved, refer to the Adjustment Section.

•Normally the cable ties holding the steering cables against the handle are loosely installed on each side of the lower handle at the factory. Pull the cable ties tight to secure. Cut the excess from the ends of cable ties.

•If not already attached, slip the cables that run from the handle panel to the discharge chute into the cable guide. See Figure 3-7.

3

Setting Up

Your Snow

Thrower

Figure 3-5

WARNING

Prior to operating your snow thrower, refer to Auger Control on page 9. Read and follow all instructions carefully and perform all adjustments to verify your unit is operating safely and properly.

Figure 3-6

Figure 3-7

7

Page 6 Page 8
Page 7
Image 7
MTD 33, 45, 28 warranty Attaching the Chute Assembly, Attaching the Shift Rod
Page 6 Page 8

45, 33, 28 specifications

MTD (Machine Tool Division) has become synonymous with advanced machining solutions, particularly with its 28, 33, and 45 series, each designed for specific industrial applications yet sharing common core features that enhance performance and productivity.

The MTD 28 series is primarily focused on precision machining for small to medium components. One of its standout features is the high-speed spindle technology, which supports a range of drilling and milling operations with minimal downtime. The machine is equipped with a robust structure designed to absorb vibrations, ensuring high precision and surface finish quality. Additionally, the MTD 28 integrates an intuitive user interface, allowing operators to navigate complex machining processes with ease. The series supports multiple tool configurations, enabling rapid changeovers and versatility in production.

Moving to the MTD 33 series, this model is engineered for medium to large production runs. A key characteristic of the MTD 33 is its advanced automation capabilities, including automatic tool changers and integrated robotic systems. These technologies streamline operations, reducing cycle times significantly. The series also boasts enhanced thermal stability, which is crucial for maintaining accuracy in high-speed machining environments. Furthermore, the MTD 33 utilizes an adaptive control system that adjusts machine parameters in real-time, optimizing performance based on workload and material type.

The MTD 45 series is the flagship among them, designed for high-performance machining tasks in heavy industry. It features an expansive workspace and a powerful drive system that allows for the machining of large components with exceptional torque. This series utilizes advanced CNC controls, ensuring precision that meets industry standards. The MTD 45 is also equipped with advanced coolant and lubrication systems, enhancing tool life and ensuring optimal cutting conditions. Moreover, this model supports a variety of machining processes, including turning, milling, and grinding, further solidifying its versatility in diverse manufacturing settings.

In summary, the MTD 28, 33, and 45 series exemplify innovative engineering and user-centric design. With features like high-speed spindles, automation capabilities, and robust construction, these machines cater to varying production needs while ensuring precision and efficiency. Whether for small component fabrication or large scale industrial applications, MTD’s commitment to technological advancement enables businesses to achieve greater productivity and quality in their machining processes.
Top Page Image Contents