Chapter 5 – Call Control Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 24
Incoming Call Bearer +CICB
Description: This command sets the type of incoming calls when no incoming bearer is given (see +CSNS).
Note: Setting the +CICB command affects the current value of +CSNS.
Values: <mode>
0 Data
2 Speech
Syntax: AT+CICB=<mode>
Command Possible responses
AT+CICB=2
Note: If no incoming bearer, force a voice call OK
Note: Command accepted
AT+CICB?
Note: Interrogate value +CICB: 2
OK
Note: Default incoming bearer: voice call
AT+CICB=?
Note: Test command +CICB: (0-2)
OK
Note: Speech or data default incoming bearer
Single Numbering Scheme +CSNS
Description: Selects the bearer to be used when an modem single numbering scheme call is set up (see +CICB).
Note: Setting the +CSNS command affects the current value of +CICB.
Values: <mode>
0 Voice
4 Data
Syntax: AT+CSNS
Command Possible responses
AT+CSNS=0 Note: force a voice call OK Note: Command accepted
AT+CSNS? Note: Interrogate value +CSNS: 0 Note: Default incoming bearer: voice call
AT+CSNS=? Note: Test command +CSNS: (0,2,4) Note: Voice o
r
data default incoming
bearer
Gain Control +VGR, +VGT
Description: This command is used by the application to tune the receive gain of the speaker and the transmit gain
of the microphone.
Values: <Rgain> is the reception gain
<Tgain> is the transmission gain
Syntax: AT+VGR=<Rgain> and AT+VGT=<Tgain>
Command Possible responses
AT+VGR=25
OK Note: Command valid
AT+VGT=45 OK Note: Commandvalid
AT+VGR?
Note: Interrogate value +VGR: 128
OK Note: Default receive gain
AT+VGR=?
Note: Test command +VGR: (0-255)
OK Note: Possible values
AT+VGT?
Note: Interrogate value +VGT: 32
OK Note: Default transmit gain
AT+VGT=?
Note: Test command +VGT: (0-255)
OK Note: Possible values
Note: For the AT+VGT? command with controller 1, the value is the lower value of range; whereas,
with controller 2, the value corresponds to the entered value using AT+VGT=xx.