MultiModemDSVD User Guide | A Regulatory Compliance |
Appendix A: Regulatory Compliance
FCC Part 68 Telecom
1.This equipment complies with part 68 of the Federal Communications Commis- sion Rules. On the outside surface of this equipment is a label that contains, among other information, the FCC registration number. This information must be provided to the telephone company.
2.The suitable USOC jack (Universal Service Order Code connecting arrangement) for this equipment is shown below. If applicable, the facility interface codes (FIC) and service order codes (SOC) are shown.
3.An
4.The ringer equivalence number (REN) is used to determine the number of devic- es that may be connected to the telephone line. Excessive RENs on the telephone line may result in the device not ringing in response to an incoming call. In most, but not all, areas the sum of the RENs should not exceed 5.0. To be certain of the nuber of devices that may be connected to the line, as determined by the total RENs, contact the local telephone company.
5.If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be re- quired. But if advance notice is not practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a com- plaint with the FCC if you believe it is necessary.
6.The telephone company may make changes in its facilities, equipment, opera- tions, or procedures that could affect the operation of the equipment. If this hap- pens, the telephone company will provide advance notice in order for you to make necessary modifications in order to maintain uninterrupted service.
7.If trouble is experienced with this equipment (the model of which is indicated below) please contact
8.No repairs are to be made by you. Repairs are to be made only by
9.This equipment should not be used on party lines or coin lines.
10.If so required, this equipment is
56
