Multi-Tech Systems MT5600DSVD manual Voice Commands, Command $SBn Serial Port Baud Rate

MultiModemDSVD User Guide		4 AT Commands, S-Registers, and Result Codes
Command: $SBn Serial Port Baud Rate
Values:	n = speed in bits per second
Default:	57600
Description: $SB300		Set serial port to 300 bps.
	$SB1200	Set serial port to 1200 bps.
	$SB2400	Set serial port to 2400 bps.
	$SB4800	Set serial port to 4800 bps.
	$SB9600	Set serial port to 9600 bps.
	$SB19200	Set serial port to 19200 bps.

	$SB38400 Set serial port to 38400 bps.
	$SB57600 Set serial port to 57600 bps.
	$SB115200 Set serial port to 115200 bps.
	$SB230400 Set serial port to 230400 bps.
		Note: See also the L5 command.
Command: +++AT<CR> Escape Sequence
Values:	n/a
Description:		Puts the modem in command mode (and optionally issues a
		command) while remaining online. Type +++AT and up to ten
		command characters, then press ENTER. Used mostly to issue
		the hang-up command: +++ATH<CR>.

Voice Commands

The MultiModemDSVD uses DSVD technology to achieve simultaneous voice and data operation over a telephone line. Establishing a DSVD connection is like estab- lishing a regular data modem connection. Initiate the call to another DSVD modem using normal dialing (ATD) and answering (ATA) procedures. The modem can switch from a regular phone conversation into DSVD mode and back to phone con- versation. A headset or microphone/speaker can be used for voice communication during DSVD mode.

Command: -SMS=nData/DSVD Mode

Values:	n = 0, 1, or 3
Default:	3

Description: -SMS=0 Data mode. -SMS=1 DSVD mode.

-SMS=3 Automatic mode select (data/DSVD)

Note: DSVD mode can be enabled by either the -SSE=1or the -SMS=1command, and disabled by either -SSE=0or -SMS=0.

39