Multiquip DCA-10SPX4 - GENERATOR SHUT-DOWN PROCEDURES, Normal Shutdown Procedure

DCA-10SPX4 — GENERATOR SHUT-DOWN PROCEDURES

WARNING - SHUTTING DOWNTHE GENERATOR

NEVER stop the engine suddenly except in an emergency.

Normal Shutdown Procedure

To shutdown the generator use the following procedure:

1.Place both the main, GFCI, and aux. circuit breakers as shown in Figure 20 to the OFF position.

2.Set the Speed Control Switch to the START/IDLE position as shown in Figure 22 and let the engine cool for 3-5 minutes with no load applied.

3.Turn the ignition key counter-clockwise to the STOP position. When the engine has stopped, remove key. Place key in a safe place where it will not be lost.

4.Inspect entire generator for any damage or loosening of components that may have occured during operation.

Emergency Shutdown Procedure

1.Turn the ignition key counter-clockwise to the STOP position. When the engine has stopped, remove key. Place key in a safe place where it will not be lost.

2.Place both the main, GFCI, and aux. circuit breakers as shown in Figure 20 to the OFF position.

DCA-10SPX4— OPERATION AND PARTS MANUAL — REV. #0 (02/17/09) — PAGE 31