DCA-10SPX3 — GENERAL INFORMATION
DCA-10SPX3 3 FAMILIARIZATION
Generator
The MQ Power Model
Control Panel
The control panel is provided with the following:
One GFCI 120 volt receptacle, 20 amp
10 kW Output Terminal (UNV)
Main Circuit Breaker 45 amps
GFCI Circuit Breaker 20 amps
AC Ammeter
AC Voltmeter
Output Voltage Adjustment
Ignition Switch
Water Temperature Gauge
Oil Pressure Gauge
Warning Indicator
Frequency Meter (Hz)
Hour Meter
Ground Terminal
Open Delta Excitation System
The
There are four Leads: A, B, C and D. During light loads, the power to the AutomaticVoltage Regulator (AVR) is supplied from the leads of B & C, when loads increase, the AVR switches and accepts power from leads A & D. The output of leads A & D increase proportionally with load. This has the effect of adding the voltages of each phase to provide better voltage response during heavy loads.
The connections of the AVR to the AC output windings are for the sole purpose of sensing only. No power is required from these windings.
The
Engine
The
In keeping with MQ Power's policy of constantly improving its products, the specifications quoted herein are subject to change without prior notice.
PAGE 20 —