Battery

This unit is of negative ground. DO NOT connect in reverse. Always maintain battery fluid level between the specified marks. Battery life will be shortened, if the fluid level is not properly maintained. Add only distilled water when replenishment is necessary. DO NOT over fill.

The battery is sufficiently charged if the specific gravity of the battery fluid is 1.28 (at 68° F). If the specific gravity should fall to 1.245 or lower, it indicates that the battery is dead and needs to be recharged or replaced.

Check to see whether the battery cables are loose. Poor contact may result in poor starting or malfunctions. Always keep the terminals firmly tightened. Coating the terminals with a thin film of grease will help to inhibit corrosion.

Battery Cable Installation

ALWAYS be sure the battery cables (Figure 15) are properly connected to the battery terminals as shown below.The RED cable is connected to the positive terminal of the battery, and the BLACK cable is connected to the negative terminal of the battery.

Figure 15. Battery Connections

DCA-10SPX3 — PRE-SETUP

CAUTION :

If the battery cable is connected incorrectly, damage to the generator will occur. Pay close attention to the polarity of the battery when connecting the battery.

When connecting battery do the following:

1.DO NOT connect the battery cables to the battery terminals when the key is in the ignition and is set in 'START' mode. ALWAYS remove the key from the ignition and the ignition switch is in the OFF position when connecting the battery.

2.Place a small amount of grease around both battery terminals. This will ensure a good connection and will help prevent corrosion around the battery terminals.

CAUTION :

Inadequate battery connections may cause poor starting of the generator, and create other malfunctions.

Wiring

Inspect the entire generator for bad or worn electrical wiring or connections. If any wiring or connections are exposed (insulation missing) replace wiring immediately.

Piping and Hose Connection

Inspect all piping, oil hose, and fuel hose connections for wear and tightness.Tighten all hose clamps and check hoses for leaks.

If any hose (fuel or oil) lines are defective replace them immediately.

DCA-10SPX3 A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #2 (01/17/11) — PAGE 33

Page 32 Page 34
Page 33
Image 33
Multiquip DCA10SPX3 manual Battery Cable Installation, Wiring, Piping and Hose Connection
Page 32 Page 34

DCA10SPX3 specifications

The Multiquip DCA10SPX3 is a versatile and robust diesel generator designed to meet the power requirements of various applications. Known for its reliability and efficiency, this generator is particularly well-suited for construction sites, outdoor events, and any situation where a dependable power source is necessary.

One of the standout features of the DCA10SPX3 is its impressive power output. With a maximum output of 10 kW, this generator can support a wide array of electrical equipment, making it ideal for both residential and commercial usage. The generator operates quietly, ensuring that it won't disturb the surrounding environment, which is particularly important for events or near residential areas.

The DCA10SPX3 utilizes a rugged, industrial-grade diesel engine that is designed for durability and low maintenance. This not only enhances the longevity of the generator but also ensures that it can handle tough working conditions. The generator is equipped with a heavy-duty steel frame, providing added protection and stability, further extending its lifespan.

Another significant feature of the DCA10SPX3 is its fuel efficiency. The generator can provide extended runtimes on a single tank of diesel fuel, reducing the frequency of refueling and allowing for longer operational periods. This efficiency is an essential feature for users who need consistent power over extended durations.

The unit is also equipped with advanced technologies for safety and performance. Features such as low oil pressure shutdown, high coolant temperature shutdown, and overload protection help to safeguard the engine and extend service intervals. These technologies ensure that the generator operates within optimal parameters, reducing the risk of unexpected breakdowns.

User-friendly controls make the DCA10SPX3 accessible to operators of all skill levels. The generator includes a digital control panel that displays key metrics such as voltage, frequency, and total runtime. This allows users to monitor performance and make adjustments as necessary easily.

Additionally, the compact design of the DCA10SPX3 facilitates easy transport and maneuverability, making it a practical option for job sites and temporary installations. With its combination of power, durability, and user-friendly features, the Multiquip DCA10SPX3 proves to be an excellent choice for anyone needing reliable and efficient diesel power.
Top Page Image Contents