Multiquip SP706020, SP706016, SP706036, SP706030, SP706026 Rules and Regulations, General Safety

Models: SP706016 SP706026 SP706030 SP706036 SP706020

1 64
Download 64 pages 49.48 Kb
Page 10
Image 10

RULES AND REGULATIONS

WARNING — Read This Manual

Failure to follow instructions in this manual may lead to serious injury or even DEATH! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

GENERAL SAFETY

DO NOT operate or service this equipment before reading this entire manual.

This equipment should not be operated by persons under 18 years of age.

NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication.

NEVER operate this equipment under the influence of drugs or alcohol.

NEVER disconnect any “emergency or safety devices.” These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties.

NEVER use accessories or attachments that are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties. Any modification which could lead to a change in the original characteristics of the machine should be made only by the manufacturer who shall confirm that the machine is in conformity with appropriate safety regulations.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult to read.

ALWAYS check the equipment for loosened threads or bolts before starting.

NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing engine or pump.

ALWAYS allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot components can cause serious burns.

NEVER operate this equipment in any enclosed or narrow area where free flow of the air is restricted. The engine of

this equipment requires an adequate free flow of cooling air. If the air flow is restricted it will cause serious damage to the equipment or engine and maycauseinjurytopeopleand property. Remember the engine gives off DEADLY gases.

ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

ALWAYS use extreme caution when working with flammable liquids.When refueling, stop the engine and allow it to cool.

DO NOT smoke around or near the

equipment. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

NEVER operate the equipment in an

explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

AVOID wearing jewelry or loose fitting clothing that may snag on the controls or moving parts. This can cause serious injury.

Make certain the operator knows how to and is capable of turning the engine OFF in case of an emergency.

DO NOT top-off fuel tank.Topping-off is dangerous as it causes fuel to spill.

PAGE10 — SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09)

Page 10
Image 10
Multiquip SP706020, SP706016, SP706036, SP706030, SP706026 operation manual Rules and Regulations, General Safety