STAY-LEVEL HANDLEBARS/BATTERY

STAY-LEVEL HANDLEBARS (SLH)

This saw incorporates a unique handlebar design that allows the handlebars to maintain a level height position regardless of the angle of the saw. Along with this, the height of the handlebars can be adjusted for individual operator providing for more comfortable operation.

To adjust the handlebar height:

1.Loosen the SLH linkage adjustment plate bolts (Figure 21).

2.Set the handlebars to the desired height.

3. Tighten the SLH linkage adjustment plate bolts.

Figure 21. Stay-Level Handlebars

BATTERY SETUP

WARNING — Battery hazards

Always recharge the battery in a well- ventilated area to avoid risk of a dangerous concentration of combustible gases.

Battery electrolyte contains corrosive, toxic chemical. (dilute sulfuric acid). Avoid contact with eyes and skin.

WARNING — Shock hazards

Disconnect battery cables before inspecting electrical system and never “spark” battery terminals to test for charge.

CAUTION — Battery safety

Use all safety precautions specified by the battery manufacturer when working with the battery.

This saw was shipped with a wet charged battery (Figure 22). This battery may need to be charged for a brief period of time as per the manufacturer instructions.

Figure 22. Battery and Battery Box

To install the battery on the saw, make sure that the battery is properly clamped into the battery box. Connect the positive cables to the positive terminals on the battery first, then connect the negative cables to the negative terminals.

The 7060 uses two positive battery cables and twonegativebatterycables.Onesetisforengine start, and the other is for the raise/lower pump assembly.Make sure that both sets of cables are connected to the battery.Also, LIMIT the cycling of the raise/lower system on battery power only. Frequentcyclingwilldiminishthelifeofthebattery.

SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 31

Page 30 Page 32
Page 31
Image 31
Multiquip SP706016 Stay-Level Handlebars/Battery, STAY-LEVEL Handlebars SLH, Battery Setup, To adjust the handlebar height
Page 30 Page 32

SP706016, SP706026, SP706030, SP706036, SP706020 specifications

Multiquip is a prominent name in the construction equipment industry, known for its innovative and reliable products. Among its versatile offerings, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 stand out as notable concrete pump models. These pumps provide exceptional performance and efficiency, making them ideal for a wide range of applications.

Each model in this lineup is engineered for maximum durability and reliability. The SP706020, for instance, features a powerful and efficient hydraulic system that allows for smooth operation and consistent performance, even in demanding conditions. It is designed with a robust frame that can withstand rigorous job site environments, ensuring longevity and reduced maintenance.

The SP706016 stands out with its compact design, making it suitable for smaller job sites while still offering high output and efficiency. This model is equipped with advanced safety features, such as emergency stop buttons and pressure relief valves, ensuring safe operation for the user and surrounding personnel.

Notably, the SP706036 is designed for high-capacity pumping. It is ideal for larger projects that require higher output without compromising on efficiency. Its advanced pumping technology reduces the potential for blockages, enhancing overall productivity. The SP706030 presents a balance between power and size, making it an excellent choice for medium-scale projects.

The SP706026 is notable for its energy-efficient design, which minimizes fuel consumption while providing robust performance. This model reflects Multiquip's commitment to sustainability and cost-effectiveness, allowing contractors to save on operational costs over time.

Across the series, user-friendly controls and adjustable settings provide operators with the flexibility needed to handle various types of concrete mixes and job specifications. Additionally, these models are fitted with high-quality components that enhance performance and reduce wear and tear.

In summary, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 are versatile concrete pumps equipped with cutting-edge technology, ensuring high efficiency, reliability, and safety on any job site. Their various features and specifications make them a valuable addition to any construction operation, catering to diverse project needs while ensuring exceptional performance.
Top Page Image Contents