MAINTENANCE

COOLING SYSTEM

The Deutz 2011 Series engine uses a robust, heavy duty oil cooler system to cool the engine. The cooling system will benefit from periodic inspection and cleaning.

1.Disconnect the air intake hose at the lifting bale (Figure 44, Item A).

2.Remove 3 bolts that mount the air filter bracket to the engine (Item B), and cover the oil cooler (Item C).

3.Remove the air box cover (Item D).

D

B

A

C B

Figure 44. Air Cleaner Removal

4.Use a nylon bristle brush to gently brush the underside of the oil cover to break loose any accumulated dirt and debris.

5.Using compressed air, carefully blow from the top of the oil cooler to remove lodged dirt and debris. Blow out any dirt out of the air box.

6.Use compressed air to next blow accumulated dirt and debris from the fan air intake, fan, and fan tunnel.

7.Using a non-caustic degreasing agent, soak entire oil cooler and let sit for several minutes.With low pressure water, such as a garden hose with a spray nozzle, thoroughly rinse oil cooler and air box out.

8.Re-install air box cover, air filter assembly and mount, and tighten air intake hose connector.

Refer to your engine manual for additional information.

BATTERY/CHARGING SYSTEM

WARNING — Battery hazards

Always recharge the battery in a well- ventilated area to avoid risk of a dangerous concentration of combustible gases.

Battery electrolyte contains corrosive, toxic chemical. (dilute sulfuric acid). Avoid contact with eyes and skin.

Shock or Fire due to electric short-circuit. Disconnect battery cables before inspecting electrical system and never "spark" battery terminals to test for charge.

This saw uses a Group 75, 12 Volt, 850 CCA (cold cranking amp) AGM Technology battery. See Figure 45.

1.Check and clean battery terminals for corrosion.

2.Never attempt to charge a battery that is frozen. The battery can explode unless first allowed to thaw.

3.Disconnect the negative terminal ( - ) of the battery during storage. If unit will be stored where ambient temperature will drop to -15oC or less, remove and store battery in a warm, dry place.

SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 43

Page 42 Page 44
Page 43
Image 43
Multiquip SP706030 Cooling System, BATTERY/CHARGING System, Disconnect the air intake hose at the lifting bale , Item a
Page 42 Page 44

SP706016, SP706026, SP706030, SP706036, SP706020 specifications

Multiquip is a prominent name in the construction equipment industry, known for its innovative and reliable products. Among its versatile offerings, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 stand out as notable concrete pump models. These pumps provide exceptional performance and efficiency, making them ideal for a wide range of applications.

Each model in this lineup is engineered for maximum durability and reliability. The SP706020, for instance, features a powerful and efficient hydraulic system that allows for smooth operation and consistent performance, even in demanding conditions. It is designed with a robust frame that can withstand rigorous job site environments, ensuring longevity and reduced maintenance.

The SP706016 stands out with its compact design, making it suitable for smaller job sites while still offering high output and efficiency. This model is equipped with advanced safety features, such as emergency stop buttons and pressure relief valves, ensuring safe operation for the user and surrounding personnel.

Notably, the SP706036 is designed for high-capacity pumping. It is ideal for larger projects that require higher output without compromising on efficiency. Its advanced pumping technology reduces the potential for blockages, enhancing overall productivity. The SP706030 presents a balance between power and size, making it an excellent choice for medium-scale projects.

The SP706026 is notable for its energy-efficient design, which minimizes fuel consumption while providing robust performance. This model reflects Multiquip's commitment to sustainability and cost-effectiveness, allowing contractors to save on operational costs over time.

Across the series, user-friendly controls and adjustable settings provide operators with the flexibility needed to handle various types of concrete mixes and job specifications. Additionally, these models are fitted with high-quality components that enhance performance and reduce wear and tear.

In summary, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 are versatile concrete pumps equipped with cutting-edge technology, ensuring high efficiency, reliability, and safety on any job site. Their various features and specifications make them a valuable addition to any construction operation, catering to diverse project needs while ensuring exceptional performance.
Top Page Image Contents