INSTALLING THE BLADE

INSTALLING THE BLADE

The blade can be mounted on either side of the saw to accomodate different cutting jobs. With the proper sized blade selected, reference the following procedure to install the new blade.

Ensure the flange faces are kept clean and smooth as well as the inside diameter of the blade shaft.

1. Raise the saw so the blade will clear the ground when installed.

2. Remove the blade flange bolt.This bolt is LEFT-HAND thread on the RIGHT side of the saw and RIGHT-HAND thread on the LEFT side of the saw.

3.Verify the blade flanges are clean and not damaged. Pay particular attention to all holes and recesses.Clean or “rod-out” as necessary (Figure 9).

Figure 10. Aligning Flange Pin Through Blade

WARNING — Tighten Blade Mounting Bolt

Failure to properly tighten the blade mounting bolt can result in the bolts coming loose with the blade flange potentially falling off the rotating blade shaft assembly. The blade and other parts coming loose from the saw during operation pose a high risk of serious injury or even death!

6.With the blade still off the ground, tighten mounting bolt as tight as can be achieved until blade spins. (Figure 11, Item B shows tightening direction for blade mounted on RIGHT side of saw.)

B

Figure 9. Inspect and Clean Flange

4. Taking note of the direction of rotation of the blade (Figure 11, Item A), insert the bushing and mounting bolt through the outer flange and blade (Figure 10).

5. Align flange pin through the blade into the inner flange.

The blade mounting bolt on the right side of the saw (as viewed from the operator’s position), has a left-handthread,while thebolton the left sideof the saw has a right-handthread.

A

A.Blade Direction of Rotation

B.Tightening Direction - Right Side

Figure 11. Blade Rotation Direction

PAGE26 — SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09)

Page 26
Image 26
Multiquip SP706016, SP706020, SP706036 Installing the Blade, Align flange pin through the blade into the inner flange

SP706016, SP706026, SP706030, SP706036, SP706020 specifications

Multiquip is a prominent name in the construction equipment industry, known for its innovative and reliable products. Among its versatile offerings, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 stand out as notable concrete pump models. These pumps provide exceptional performance and efficiency, making them ideal for a wide range of applications.

Each model in this lineup is engineered for maximum durability and reliability. The SP706020, for instance, features a powerful and efficient hydraulic system that allows for smooth operation and consistent performance, even in demanding conditions. It is designed with a robust frame that can withstand rigorous job site environments, ensuring longevity and reduced maintenance.

The SP706016 stands out with its compact design, making it suitable for smaller job sites while still offering high output and efficiency. This model is equipped with advanced safety features, such as emergency stop buttons and pressure relief valves, ensuring safe operation for the user and surrounding personnel.

Notably, the SP706036 is designed for high-capacity pumping. It is ideal for larger projects that require higher output without compromising on efficiency. Its advanced pumping technology reduces the potential for blockages, enhancing overall productivity. The SP706030 presents a balance between power and size, making it an excellent choice for medium-scale projects.

The SP706026 is notable for its energy-efficient design, which minimizes fuel consumption while providing robust performance. This model reflects Multiquip's commitment to sustainability and cost-effectiveness, allowing contractors to save on operational costs over time.

Across the series, user-friendly controls and adjustable settings provide operators with the flexibility needed to handle various types of concrete mixes and job specifications. Additionally, these models are fitted with high-quality components that enhance performance and reduce wear and tear.

In summary, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 are versatile concrete pumps equipped with cutting-edge technology, ensuring high efficiency, reliability, and safety on any job site. Their various features and specifications make them a valuable addition to any construction operation, catering to diverse project needs while ensuring exceptional performance.