RULES AND REGULATIONS

NEVER use fuel as a cleaning agent.

ALWAYS store the equipment in a clean, dry location out of the reach of children.

NEVER run engine without air cleaner or air filter.Severe engine damage may occur. Service air cleaner at recommended service intervals to prevent engine damage.

NEVER leave the equipment unattended with the engine running.Turn off engine when unattended.

CAUTION must always be observed while servicing this equipment. Rotating parts can cause injury if contacted.

ALWAYS keep the work area well-organized.

Keep the saw clean. It will perform better and last longer.

ALWAYS check to make sure that the cutting area is clear before starting the engine. ALWAYS clear the cutting area of any debris, tools, etc. that would constitute a hazard while the saw is in operation.

Keep all inexperienced and unauthorized people clear of the cutting area when operating the saw.

No one other than the operator is to be in the working area when the saw is in operation.

NEVER allow passengers or riders on the saw during operation or transportation.

Make certain all protective guards are securely in place BEFORE operating the saw.This saw is supplied with a blade guard, blade flange guard and a belt guard.

NEVER place your feet or hands inside the guards while starting or operating this equipment.

DO NOT go near rotating parts, (blades, belts, pulleys or wheels), while engine is running.

Moving Parts – Shut down the engine before performing service or maintenance functions. Contact with moving parts can cause serious injury.

NEVER touch the hot exhaust manifold, muffler or cylinder.Allow these parts to cool before servicing the saw. Contact with hot!

components can cause serious burns.

Verify the engine start switch is set to the OFF position before installing a blade.

Use proper blades and follow the blade manufacturer’s recommendations. Match the blade RPM (blade shaft RPM) to the recommended blade surface feet per minute. (SFPM).

Ensure the 5/8" blade-mounting bolt is tightened to 125- 175 foot lbs. of torque.

NEVER leave the machine unattended while running.

Ensure brakes are applied when leaving or when using on a slope. This saw utilizes a brake system where the brakes are automatically applied when the engine is stopped.

Start engine with the control handle in the NEUTRAL position to prevent unexpected saw movement.

Do not start engine on a sloping surface to prevent unexpected loss of control.

DO NOT use on excessive slopes or on extremely uneven surfaces.

If the saw must be parked on a slope and engine turned off, ensure the parking brake is engaged and holds the saw safely in place.Turning the saw across the angle of the slope will help prevent accidental downhill movement. Block the saw as well when leaving.

SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 11

Page 10 Page 12
Page 11
Image 11
Multiquip SP706016, SP706020, SP706036, SP706030, SP706026 operation manual  Always keep the work area well-organized
Page 10 Page 12

SP706016, SP706026, SP706030, SP706036, SP706020 specifications

Multiquip is a prominent name in the construction equipment industry, known for its innovative and reliable products. Among its versatile offerings, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 stand out as notable concrete pump models. These pumps provide exceptional performance and efficiency, making them ideal for a wide range of applications.

Each model in this lineup is engineered for maximum durability and reliability. The SP706020, for instance, features a powerful and efficient hydraulic system that allows for smooth operation and consistent performance, even in demanding conditions. It is designed with a robust frame that can withstand rigorous job site environments, ensuring longevity and reduced maintenance.

The SP706016 stands out with its compact design, making it suitable for smaller job sites while still offering high output and efficiency. This model is equipped with advanced safety features, such as emergency stop buttons and pressure relief valves, ensuring safe operation for the user and surrounding personnel.

Notably, the SP706036 is designed for high-capacity pumping. It is ideal for larger projects that require higher output without compromising on efficiency. Its advanced pumping technology reduces the potential for blockages, enhancing overall productivity. The SP706030 presents a balance between power and size, making it an excellent choice for medium-scale projects.

The SP706026 is notable for its energy-efficient design, which minimizes fuel consumption while providing robust performance. This model reflects Multiquip's commitment to sustainability and cost-effectiveness, allowing contractors to save on operational costs over time.

Across the series, user-friendly controls and adjustable settings provide operators with the flexibility needed to handle various types of concrete mixes and job specifications. Additionally, these models are fitted with high-quality components that enhance performance and reduce wear and tear.

In summary, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 are versatile concrete pumps equipped with cutting-edge technology, ensuring high efficiency, reliability, and safety on any job site. Their various features and specifications make them a valuable addition to any construction operation, catering to diverse project needs while ensuring exceptional performance.
Top Page Image Contents