MAINTENANCE

MAINTENANCE

WARNING

Certain maintenance operations or machine adjustments require specialized knowledge and skill. Attempting to perform maintenance operations or adjustments without the proper knowledge, skills or training could result in equipment damage or injury to personnel. If in doubt, consult your dealer.

When performing maintenance operations on the saw or engine, follow all safety messages and rules for safe operation stated here and at the beginning of this manual.

Seetheenginemanufacturer’smanualsuppliedwithyourmachine for appropriate maintenance schedule and troubleshooting guide for problems.

WARNING — Accidental Starting Hazards

Accidental starts can cause severe injury or death!

ALWAYS place the ON/OFF switch in the

OFF position.

Engine and muffler surfaces can get HOT!

Allow to cool before servicing.

ALWAYS ensure saw is SECURELY placed on appropriate blocks or jackstands when performing maintenance requiring the

saw to be elevated.

CAUTION — Clean up spills

Avoid slips and falls!

Clean up all engine oil, hydraulic oil, and diesel fuel spills immediately.

Maintenance Schedule

Daily (8-10 Hours)

1.Check fluid levels in engine and reservoir; fill as necessary.

2.Visually inspect for wear and damage.

3.Visually inspect for engine leaks.

4.Check or replace the engine air filters as necessary.

5.Check operation of emergency stop button.

Monthly (125-150 Hours)

1.Change hydraulic oil and filter (first 125 hours, then every 250 hours).

2.Change engine oil and filter.

Yearly (500 Hours)

1.Replace fuel filter cartridge and v-belt.

2.Check fuel lines for leakage.

3.Check battery cables and connectors.

4.Check engine monitoring and warning system.

AIR CLEANERS (DAILY)

The saw utilizes both a primary air filter and a safety air filter (Figure 39). The air filter restriction light (Figure 38, Item A) on the engine status indicator (Figure 38, Item B) will illuminate when the filter is plugged.

A

B

Figure 38. Air Filter Restriction Light

Empty the dust discharge valve daily and clean the discharge slot from time to time (Figure 39).

While the air filters should be checked daily and replaced when necessary, there is no need to “over-service” the air filters. That is, they require no cleaning and do not require the use of oil. If the primary filter becomes clogged, simply replace it.

SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 39

Page 38 Page 40
Page 39
Image 39
Multiquip SP706026, SP706020, SP706016, SP706036, SP706030 operation manual Maintenance Schedule, AIR Cleaners Daily
Page 38 Page 40

SP706016, SP706026, SP706030, SP706036, SP706020 specifications

Multiquip is a prominent name in the construction equipment industry, known for its innovative and reliable products. Among its versatile offerings, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 stand out as notable concrete pump models. These pumps provide exceptional performance and efficiency, making them ideal for a wide range of applications.

Each model in this lineup is engineered for maximum durability and reliability. The SP706020, for instance, features a powerful and efficient hydraulic system that allows for smooth operation and consistent performance, even in demanding conditions. It is designed with a robust frame that can withstand rigorous job site environments, ensuring longevity and reduced maintenance.

The SP706016 stands out with its compact design, making it suitable for smaller job sites while still offering high output and efficiency. This model is equipped with advanced safety features, such as emergency stop buttons and pressure relief valves, ensuring safe operation for the user and surrounding personnel.

Notably, the SP706036 is designed for high-capacity pumping. It is ideal for larger projects that require higher output without compromising on efficiency. Its advanced pumping technology reduces the potential for blockages, enhancing overall productivity. The SP706030 presents a balance between power and size, making it an excellent choice for medium-scale projects.

The SP706026 is notable for its energy-efficient design, which minimizes fuel consumption while providing robust performance. This model reflects Multiquip's commitment to sustainability and cost-effectiveness, allowing contractors to save on operational costs over time.

Across the series, user-friendly controls and adjustable settings provide operators with the flexibility needed to handle various types of concrete mixes and job specifications. Additionally, these models are fitted with high-quality components that enhance performance and reduce wear and tear.

In summary, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 are versatile concrete pumps equipped with cutting-edge technology, ensuring high efficiency, reliability, and safety on any job site. Their various features and specifications make them a valuable addition to any construction operation, catering to diverse project needs while ensuring exceptional performance.
Top Page Image Contents