MAINTENANCE

CIRCUIT BREAKERS AND STARTER RELAYS

Thermalcircuitbreakersandglowplugstarterrelaysarelocated behind the console access cover at the top of the console. See Figure 59.

12

3

4

1.Circuit Breakers

2.Relay, Glow Plug

3.DelayTimer

4.Starter Relay

Figure 59. Circuit Breakers and Starter Relay

Under normal circumstances the circuit breakers do not require service.They automatically reset when an overload condition is corrected. If a breaker is cycling on and off, locate the cause of the electrical overload and repair as required.

MAXIMUM CUT DEPTH ADJUSTMENT

The saw comes factory-adjusted for maximum usable cut depth. Should this setting need to be changed, perform the following:

While adjustment of the depth stop limiting bolts can change the maximum usable cut depth, they should not be adjusted to compensate for unit “wobble” or blade/cut problems.These are a result of other issues that should be addressed.

1.With the BLADE REMOVED, park the saw on a flat and level surface.

2.Fully lower the saw onto the depth limiting stop bolts. See Figure 60.

3.Measurethedistancefromthebladeflangestothesurface.

4.If adjustment is required, loosen locknut on the right-side depth limiting stop bolt (Figure 60, item 2) and screw bolt

2

1

3

4

1.Left-Side Stop Bolt

2.Right-Side Stop Bolt

3.Blade Flanges

4.Blade Shaft Housing Figure 60. Depth Adjustment

in several turns until it no longer makes contact with the axle.

5.Adjust the left-side stop bolt (item 1) in or out until the blade flange or lower belt guard achieves 1/8" to 3/16" ground clearance.Tighten lock nut on left side.

6.Raise saw and place 2 jack stands under the blade shaft housing.

7.Whileholdingtheraise-lowerswitchintheloweringposition, raise the front axle assembly until it contacts the left-side depth limiting stop bolt.

8.While holding the axle firmly against the left-side depth limiting stop bolt, screw the right-side depth limiting stop bolt out until it makes contact with the axle. Tighten lock nut on right side.

Following this procedure will prevent torsional stresses being applied to the frame when fully lowered due to uneven adjustment of depth limiting stop bolts.

PAGE50 — SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09)

Page 49 Page 51
Page 50
Image 50
Multiquip SP706020, SP706016, SP706036, SP706030, SP706026 Circuit Breakers and Starter Relays, Maximum CUT Depth Adjustment
Page 49 Page 51

SP706016, SP706026, SP706030, SP706036, SP706020 specifications

Multiquip is a prominent name in the construction equipment industry, known for its innovative and reliable products. Among its versatile offerings, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 stand out as notable concrete pump models. These pumps provide exceptional performance and efficiency, making them ideal for a wide range of applications.

Each model in this lineup is engineered for maximum durability and reliability. The SP706020, for instance, features a powerful and efficient hydraulic system that allows for smooth operation and consistent performance, even in demanding conditions. It is designed with a robust frame that can withstand rigorous job site environments, ensuring longevity and reduced maintenance.

The SP706016 stands out with its compact design, making it suitable for smaller job sites while still offering high output and efficiency. This model is equipped with advanced safety features, such as emergency stop buttons and pressure relief valves, ensuring safe operation for the user and surrounding personnel.

Notably, the SP706036 is designed for high-capacity pumping. It is ideal for larger projects that require higher output without compromising on efficiency. Its advanced pumping technology reduces the potential for blockages, enhancing overall productivity. The SP706030 presents a balance between power and size, making it an excellent choice for medium-scale projects.

The SP706026 is notable for its energy-efficient design, which minimizes fuel consumption while providing robust performance. This model reflects Multiquip's commitment to sustainability and cost-effectiveness, allowing contractors to save on operational costs over time.

Across the series, user-friendly controls and adjustable settings provide operators with the flexibility needed to handle various types of concrete mixes and job specifications. Additionally, these models are fitted with high-quality components that enhance performance and reduce wear and tear.

In summary, the Multiquip SP706020, SP706016, SP706036, SP706030, and SP706026 are versatile concrete pumps equipped with cutting-edge technology, ensuring high efficiency, reliability, and safety on any job site. Their various features and specifications make them a valuable addition to any construction operation, catering to diverse project needs while ensuring exceptional performance.
Top Page Image Contents