TURNING OFF THE AL ARM (DISARMING) WHEN RETURNING

 

 

Disarming the System

 

DISARM/

A C O N

XXXSEC

1 Upon entry, the keypad sounder will pulse as a reminder to disarm the panel. The red

 

 

ARMED light will be on and the window will alternately display "DISARM" and "XXXSEC",

 

 

 

 

where "XXX" represents the entry time remaining in 10-second steps. During the final 10

 

Wrong/

 

seconds, the sounder will pulse (rapidly) a warning signal.

A C O N

Code

2 Enter your User Code and press D. The sounder will silence and the red ARMED light

 

 

 

 

 

 

will go out, indicating that the system has been disarmed.

 

 

If you enter an invalid code, the keypad display "Wrong Code" Re-enter your code

 

 

immediately.

ALARM/ A C O N ZONE02

Alarm Indication / Silencing an Alarm

If the red ARMED light is flashing and “ALARM” is displayed, an alarm occurred while you were out. Proceed with caution! If you suspect that an intruder may still be on the premises, leave immediately and call authorities from a neighbor's phone.

To silence an audible alarm:

1Enter your code and press J. After the system is disarmed, the window will continue to display “ALARM” followed by the zone(s) violated.

2To reset the display, note the zones violated, then press C.

11

Page 11
Image 11
Napco Security Technologies GEM-DXRP2 manual Turning OFF the AL ARM Disarming When Returning, Xxxsec