Napco Security Technologies GEM-DXRP2 PROTECTING YOURSELF WHILE ON THE PREMISES

9

Bypassing Interior Zones

Interior Zones, when bypassed, allow free movement within the premises while the protection of

armed perimeter zones is maintained. If E is pressed, all interior Zones will be bypassed upon

arming.

(OPTIONAL) Some control panels (such as the GEM-P9600) have provisions for TWO groups of Interior Zones. If two groups of zones were

programmed, proceed as follows:

1. Select the interior group by repeatedly pressing E. The window will display "INT1". "INT2",

or "INT1+2".

2. When the desired interior group is displayed, press D to select it. "BYPASSED" and

"INTERIOR" will display to indicate interior zones bypassed.

3. Enter your code, then press D. The red ARMED light will turn on and the green STATUS light

will blink, indicating zones bypassed. After the exit time has elapsed, the window will display

"ARMED" and "BYPASSED INTERIOR" will b e displayed.

Automatic Interior Bypass (Optional - Automatic Interior Bypass programmed? YES NO)

Your system may have been programmed for Automatic Interior Bypass, which allows it to recognize

that you have armed the system and remained in the house, prompting it to automatically bypass

any Interior Zones. In this case, the keypad display will normally show the icon "BYPASSED", ex-

cept when the system is armed, and the Exit Entry door is opened. At this time those Interior Zones will unbypass, providing complete interior

protection.

Easy Exit (Optional - Available on systems containing Interior Zones).

While the system is armed in the Automatic Interior Bypass state, the Easy Exit option is available. To exit the premises while the system is

armed, press D and the Exit Delay countdown will begin. You can now exit the premises through the Exit/Entry door and the system will return

to the armed state when the countdown expires.

PROTECTING YOURSELF WHILE ON THE PREMISES

BYPASSED INTERIOR

AC ON

READY

AC ON INT1+2

BYPASSED INTERIOR

AC ON

READY

BYPASSED INTERIOR

AC ON

ARMED

BYPASSED

AC ON

READY

Contents

Main 2 INTRODUCTION IMPORTANT - TEST YOUR SYSTEM WEEKLY 3 TABLE OF CONTENTS TABLE OF CONTENTS TO SILENCE AN ALARM, ENTER YOUR CODE, AND PRESS J. * Page KEYPAD CONTROLS & INDICATORS 6 ZONES FAULTED 02 BACK DOOR Arming the System 1 2 3 7 CAN'T/ ArmZnF CAN'T/ ArmSil CAN'T/ ArmSnd CAN'T/ ArmRst 8 Area Arming (Optional) Manager's Mode Global Arming TRBL EXX-XX PROTECTING YOURSELF WHILE ON THE PREMISES READY ARMED READY 10 PROTECTING YOURSELF WHILE ON THE PREMISES ARMED Instant Protection 2. instant protection. Page TURNING OF F THE ALAR M (DISARMI NG) WHEN RE TURNING Ambush Day Zone (Day Zone(s) programmed? YES NO) 24-Hour Zone (24-Hour Zone(s) programmed? YES NO) Page Page Page 16 LIMITATIONS OF FIRE ALARM WARNING SYSTEM Page 18 Display Telephone List? (OPTIONAL) (For GEM-P9600/3200 panels only). (Phone Numbers Display System Troubles? (For GEM-P9600/3200 panels only). Displays a 2-digit error code Display Fire Alarms? (For GEM-P9600/3200 panels only). Displays alarms that have oc curred on Display Fire Troubles? (For GEM-P9600/3200 panels only). Displays trouble conditions that 19 Activate Chime? Activate Watch Mode? Reset System Trouble? Start Exit Time? 20 21 Display RF Transmitter Status? Relay Control? CENTRAL STATION MONITORING 23 ADVANCED FEATURES BYPASS WAIT FAULT/ ZONE02 Page Introduction D PROGRAMMING (OPTIONAL) User 01 1. Select the Program Mode as follows: (a) (b) 5. Press J to save the code. 6. Press C to exit the Program Mode. 28 ARMED1 FAULT Zone(s) not secured (doors or windows may be open). Faulted zone(s) will scroll. 29 Arming attempted with zone in trouble. Faulted zones will scroll. Correct trouble to arm. CANCEL CAN'T/ ArmZnf CAN'T/ ArmSil 30 (OPTIONAL) (For partitioned systems only). Code not valid for area. (For Commercial Systems Only). Code not valid for programmed time window. Wrong code entered or "Easy Bypass" function not enabled. AC ON 31 Indicates problem(s) detected on the system (see below). EntNow Check power transformer. Check for blown fuse or circuit breaker; general power outage. Battery weak. If not recharged within 24 hours, replace battery. Page Page Page SYSTEM TROUBLE ERROR CODES NAPCO LIMITED WARRANTY THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC.