Page 40 | WI1501A 9/06 |
F-64 FACTORY DEFAULT DESCRIPTION
Out of Box Panel Operation
The following describes the new panel factory defaults:
The new SIA
The new versions of the panels are manufactured with the following factory programmed features:
1.All zones (64 in the
2.Default User 1 Code = "123" and it is set up to arm Area 1 and be a user program code.
3.Keypad Time/Date Display enabled.
4.The reporting format is Ademco, Silent Knight Slow.
5.Touch Tone with Rotary
6.Exit Delay = 60 seconds.
7.Entry Delay 1 and 2 are both 30 seconds.
8.AC Fail Report Delay is 60 minutes.
9.Alarm and Pulse Alarm
10.Chime is set to 2 seconds.
11.Change Pulse Alarm to Cadence Alarm is enabled.
12.Auto Reset after Burglary Output Timeout is enabled.
13.
14.
15.
16.1417 "Abort Delay" is changed to 30 seconds.
17.Cancel Time ("Cancel Window Duration") is set to zero minutes.
The complete Easy Menu Driven Program Mode menu will appear upon initial entry into Dealer Program Mode. Subsequent entry into Dealer Program Mode allows only a subset of the Easy Menu Driven Program Mode.
With this new SIA
Once the panel is removed from its box, you have three choices: (1) Do not enter Dealer Program Mode and complete the in- stallation using the unmodified factory program; (2) Upload the Factory Default Program (above) to
A critical addition to the Easy Menu Driven Program Mode is the question “Enable
1.All zones (64 in the
2.Default User 1 Code = "123" and it is set up to arm Area 1 and be a user program code.
3.Keypad Time/Date Display enabled.
4.All zones are programmed with report codes and as burg/fire alarm types depending on whether they were selected as fire zones. Zones not selected as fire are burg type.
5.The reporting format is selectable in the Easy Menu Driven Program Mode.
6.Touch Tone with Rotary
7.Exit Delay = 60 seconds.
8.Entry Delay 1 and 2 are both 30 seconds.
9.AC Fail Report Delay is 60 minutes.
10.Alarm and Pulse Alarm
11.Chime is set to 2 seconds.
12.Change Pulse Alarm to Cadence Alarm is enabled.
13.Auto Reset after Burglary Output Timeout is enabled.
If the answer to the question “Enable
Freedom | L NAPCO Security Systems |
|