WI1501A 9/06 | Page 41 |
1.Auto Reset and Swinger Shutdown are removed from burg zones.
2.
3.
4.
5.
6.
7.
8.
9.
10.1417 "Abort Delay" is changed to 30 seconds.
11.Cancel Time ("Cancel Window Duration") is set to 7 minutes.
Subsequent entering of the Dealer Program allows only a subset of the Easy Menu Driven Program Mode which does not in- clude the question “Enable
Note: When address 2053 "Enable
Out of Box Panel Operation (Prior to CP-01 Changes)
The following describes the control panel factory defaults that are loaded if you enter the Dealer Program Menu, which is also the factory default used with these panels prior to modifications made in order to comply with the
The program has minimum defaults, programmed with 8 hardwire zones (Zones
1)Default User 1 Code = "123" and enabled as an Arming Code in Area 1.
2)Dealer Program Default Code = "456789".
After powering up, the installer is required to enter Program Mode using the Dealer Program Default Code of "456789".
The Easy Menu Driven Program Mode that is entered is a series of questions regarding the required functions of the particular installation. After exiting the Easy Menu Driven Program Mode, the installer could complete the installation. Subsequent enter- ing of Dealer Program Mode allows only a subset of the Easy Menu Driven Program Mode menu that prevents the existing pro- gram from being deleted, but allows the system to be expanded.
L NAPCO Security Systems | Freedom |
|