Chapter 16 Rotating Knife
NI-Motion User Manual 16-8 ni.com
err = flex_start(boardID, slaveAxis, 0);
CheckError;
}// For loop
return;// Exit the Application
///////////////////
// Error Handling
///////////////////
nimcHandleError; //NIMCCATCHTHIS:
// Check to see if there were any Modal Errors
if (csr & NIMC_MODAL_ERROR_MSG){
do{
//Get the command ID, resource ID, and the
error code of the //modal error from the error
stack on the device
flex_read_error_msg_rtn(boardID,&commandID,
&resourceID, &errorCode);
nimcDisplayError(errorCode,commandID,resou
rceID);
//Read the communication status register
flex_read_csr_rtn(boardID,&csr);
}while(csr & NIMC_MODAL_ERROR_MSG);
}
else// Display regular error
nimcDisplayError(err,0,0);
return;// Exit the Application
}