National Instruments NI-Motion - page 93

Chapter 6 Arc Moves
© National Instruments Corporation 6-15 NI-Motion User Manual
LabVIEW Code
Figure 6-12. Helical Arc Move in LabVIEW
C/C++ Code
The following example code is not necessarily complete, and may
notcompile if copied exactly. Refer to the examples folder on the
NI-Motion CD for files that are complete and compile as is.
// Main Function
void main(void){
u8 boardID;// Board identification number
u8 vectorSpace;// Vector space number
u16 csr = 0;// Communication status register
u16 axisStatus;// Axis status
u16 status;
u16 moveComplete;
//Variables for modal error handling
u16 commandID;// The commandID of the function
u16 resourceID;// The resource ID
i32 errorCode;// Error code
///////////////////////////////
1 Configure Vector Space
2 Load Velocity
3 Load Acceleration/Deceleration
4 Load Acceleration/Deceleration
5 Load Helical Arc
6 Start Motion
7 Check Move Complete Status
8 Read per Axis Status
9 Read per Axis Status
10 Read per Axis Status
11 Motion Error Handler
11
6
3 4
110
8
7
2
5
9