National Instruments none

Chapter 2 Measurement Studio .NET Class Libraries

Use the Measurement Studio slide, tank, and thermometer controls, as

shown in Figure2-5, to input and display numeric data on your interface.

Figure 2-5. .NET Slide, Tank, and Thermometer Controls

With the slide, tank, and thermometer controls and the classes that interface

with them, you can perform the following operations:

• Fill to the minimum or maximum value of the scale.

• Position the scale horizontally with left, right, or both and position the

scale vertically with top, bottom, or both.

Tip For more information about using the Windows Forms knob, gauge, meter, slide,

tank, or thermometer controls, refer to the Knob, Gauge, Meter, Slide, Tank, or

Thermometer Class sections in the NI Measurement Studio Help.

Numeric Edit Control

Use the Measurement Studio numeric edit control, as shown in Figure 2-6,

to display numeric values and to provide a way by which end users can edit

numeric values. Typically, you use a numeric edit control to input or

display double numerical data instead of using a Windows Forms TextBox

or NumericUpDown control.

Figure 2-6. Numeric Edit Windows Forms Control