TO PLACE A CALL ON HOLD
•Press Hold key. Held line wink flashes.
NOTE: If held line appears on other Dterm stations, the associated LED flashes red slowly.
To retrieve:
•Lift handset or press Speaker key.
•Press held line. Use handset to converse.
NOTE: Any station with this line appearance can retrieve the call.
If unanswered:
•After preprogrammed time, Automatic Recall is initiated.
•Visual and audible signal (rapid flash and ring burst) is sent to station that placed call on hold.
NOTE: Hold shows as a flashing green LED on your phone. The same line on other phones shows as a flashing red LED. Recall shows as a flashing green LED on your phone and flashing red LED on other phones with the same line.
-26-
