Reset occurs at this time with the progrming station returning to 'ton-line"mode.

230.2Memory Block 9

1)Privacy Release Assignment (See Figure 340-27). Any ccambinationof cO/PBX lines can be selected to lose the privacy feature. This enables up to four stations to join a conversation with an outside party on the chosen CD/PBX line without privacy. Parties attempting to enter after a fourth party has entered will receive error tone. The default value is that all CD/PBX lines retain the privacy feature. Address 1 buttons 1 r- 6 are used with each button representing its corresponding CI/PBX line.

2)Hands-Free Telephone Assignment (See Figure 340-28). With the introduction of the ET-a-( ) Key Telephone Sets this area of the program is used to allow hands-free initiation of intercom calls. Addresses 2 and 3 are used with each of the buttons l- 8 representing a station in each of the addresses. The default value is that all stations are ET-&( ) telephone (without internal speakerphones).

3)Tandem Confererxe Assigrxnent (See Figure 340-29). This area of the program is used to reserve a station position to be used for tandem conferences. A tandem conferexe is an

-7-

Page 75
Image 75
NEC 616 manual