NEC 616 manual SECTllON 400 Station Key Telephone Operation, Operation Procedure

pm

SECTllON 400 STATION

410 Key Telephone Operation

410.1CO/P5X (Outside Calls)

1.Originating

Using Manual Dialing

-depress idle (unlit) m

-lift handset or depress q3

-receive dial tone

-dial desired number

-when party answers, use handset .to talk

Using Last CO/PBX Number Redial

-	depress	idle	(unlit)		~
-	lift handset		or	depress s
					tl
-	receive	dial	tone
a
-	depress	Last Number			Key
-	display	shows		m]
-	when party		answers,		use handset to talk

Using Speed Dialing - Station and System

-depress idle (unlit) B

-lift handset or depress qs receive dial tone

-depress Speed Dial Key m

-display shows VI

For Station Speed Dialing

-depress desired m

or,

For System Speed Dialing

-dial 20 - 59 for the particular number desired

-display shows Speed Dial Buffer Number mj

OPERATION PROCEDURE

Use of station or system Speed Dialing can automat- ically seize an acceptable COjPBX line eliminating the need to depress II CO/PBX line. For 4 pnrticubu CO/PBX line, depress CO before depressing the

Using Prime Line Pick-Up

-lift handset or depress ,$

III

-receive dial tone

-use any of the dialing methods discussed here

Note: For consecutive dialing, depressing the Speed Din1 Key initiates speed dialing at any time. The keypad

is ah4ys live for manual dialing.

2. Answering

When a slow Flashing co is present on Keyset

- depressing flashing q

- lift handset

- respond to caller

3. Placing a Call On Hold

Placine a CO/PBX Call on Non-Exclusive Hold

- 1

during CO/PBX conversation, depress [HOLDIonce

-display shows m

or,

- depress m for KM call. The ca3.l in progress will automatically be put on hold.

Note: Depressing the page, door phone or pick-up buttons will also automatically place the CO call on non- exclusive hold and activate the selected feature.

,

Placing a CO/PBX Call on Exclusive Hold

-during CO/PBX conversation, depress [HOLDItwice

-display shows [m

Page 400-l