Chapter 5 Normal Operation
III-47
The display items are as follows:
(1) Disk Array Detail Information
Displays the detailed information of the specified disk array.
Disk Array Name: Individual name of the disk array
Resource State: Status of the disk array and resources
For details, refer to (1) “Display of a disk array list”.
Monitoring: Monitoring state of the disk array
For details, refer to (1) “Display of a disk array list”.
Vendor ID: ID of the disk array’s supplier
Product ID: Model name of the disk array
Product FW Revision: Information about the version of the disk array
Serial Number: Product number of the disk array
SAA: SAA of the disk array
World Wide Name: Worldwide name of the disk array
Total Capacity: Total capacity of the physical disks
User System Code: User system code
* If the target disk array is not supported, “0000000000” is displayed.
Storage Control
Software Revision: Revision of storage control software
* Refer to 3.3 “Nickname Setting” for details on the setting of Disk Array Name.
Refer to 3.2 “State Monitoring” for details on the setting for the monitoring function to start/stop monitoring the
disk array status.
(2) Disk Array Control Mode
Displays the values set for the specified disk array.
Cross Call Mode: Indicates that the Cross Call mode is on/off.
Auto Assignment Mode: Indicates that the Auto Assignment mode is on/off.
Auto Repair Mode: Indicates that the Auto Repair mode is on/off.
Auto Time Setup Mode: Indicates that the Auto Time Setup mode is on/off.
(3) Access Control Information
Displays access control information.
Access Control Mode: Indicates that the Access Control mode is on/off.
(4) Control Path
Displays information about the paths to which the disk array is connected.
Path No.(h): Indicates the path number.
Control Path: Indicates the control path.
The IP address (with LAN connection) or the FC path name is displayed.
“-” is displayed if there is no path to which the current path is switched when a failure occurs.
Path State: Indicates either of the following as the path state:
ready: Normal state
fault: Abnormal state (blockade)