Chapter 5 Normal Operation
III-60

(13) List of physical disk information

If the -h option is specified, the system lists information about the PDs of a specified disk array.
#iSMview -h Storage001
--- PD List ---
PDN(h) PD State Classification
00-00 ready data
00-01 info. (inactive) data
00-02 ready data
00-03 ready data
00-04 ready not set
00-05 ready not set
00-06 ready not set
00-07 ready not set
The display items are as follows:
(1) PD List
Lists the information of all PDs bound in the specified disk array.
PDN(h): Physical disk number
PD State: Operating state of each PD
ready: The PD is in normal state.
attn.(powering up): The PD is being activated.
attn.(rebuilding): The PD is being rebuilt.
attn.(formatting): The PD is being formatted.
info.(inactive): The PD is under preventive maintenance.
fault: The PD is in abnormal state.
Classification: Classification of the PD
data: The target PD is available as a data area.
spare: The target PD is a hot spare disk.
not set: The target PD is not set as “data” or “spare”.
* If no PDs exist in a specified disk array, the error message as shown below is displayed.
iSM11174:PD doesn’t exist.

0