Chapter 1 Server Installation
I-10
(i) [User List]
[User List] displays the list of users currently registered. This user name is used for obtaining authorization to
connect with an iSM server from an iSM client, and display and control the disk array information form the
iSM client. Up to 100 user names can be registered in the User List.
(ii) [Add] button
To add a user, use the [Add] button to open the Add screen (Figure 1-7).
(iii) [Delete] button
To delete a user, select a user you want to delete, and click the [Delete] button.
(iv) [Edit] button
To modify a user, select a user you want to edit and click the [Edit] button, or double-click the user and edit it
on the Edit screen (Figure 1-7).
Figure 1-7 User - Add Screen
(v) [User Name]
In [User Name], specify a user name within 20 characters. User Name is case-sensitive. Non-ASCII code
characters, control characters, double quotation mark, and space cannot be used for a user name.
(vi) [Password]
In [Password], specify a password of the user within 14 characters. Password is case-sensitive. Enter the
same password in [Password Confirmation] for confirmation. The character you enter is displayed as a “*”.
Non-ASCII code characters, control characters, and double quotation mark cannot be used for a password. A
password cannot consist of all spaces.
(vii) [User Level]
In [User Level], specify the operation authorization level of the user. iSM defines the three kinds of user
levels that set/refer information of disk arrays by iSM client. An upper level (L3>L2>L1) allows all
operations of a lower level.
L1(Level 1): Only reference to state display is authorized.
L2(Level 2): Operations at the level of the replication, performance monitoring, performance optimization, and
snapshot functions are authorized.
L3(Level 3): All operations are authorized, such as changing the disk array configuration.
(v)
(vi)
(vii)