NEC PV46, PV40, PV32 user manual Connect DVD Player, Connect Hdmidtv

Connect DVD Player

Y	Pb	Pr	(L) AUDIO (R)
	COMPONENT IN			S-VIDEO IN

	Connections - continued
Connect the DVD video outputs to the COMPONENT (Y, Pb, Pr) jacks and connect the		English
DVD audio outputs to the AUDIO jacks.
Viewing Setup
1.	Turn on the DVD player, insert a DVD.
2.	Use the INPUT button on the remote control to select Component.

Y PB PR (R) AUDIO (L)

DVD

3.Refer to the DVD player's manual for operating instructions.

• Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown.

Component input signal : 480i / 480p / 720p / 1080i

Component input on Set	Y	Pb	Pr
	Y	PB	PR
Video Output on	Y	B-Y	R-Y
DVD	Y	Cb	Cr
	Y	PB	PR

Connect HDMI(DTV)

HDMI1 IN (DVI)	HDMI2 IN (DVI)	AUDIO IN	RGB IN
		(RGB/DVI)	(PC/DTV)

	or
HDMI OUTPUT	(R) AUDIO (L)

This TV SET can receive High-Definition Multimedia Interface (HDMI) or Digital Visual Interface (DVI) signals.

Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the particular HDMI INPUT socket of the set.

Connect the audio cable from the PC to the AUDIO INPUT sockets of the set.

Press the INPUT button to select HDMI1, HDMI2, or HDMI3 (APV40/46 only).

Switch on the HDMI device, and the HDMI screen appears on the set.

HDMI-DTV input signal: 480p-60Hz, 720p-50Hz, 720p-60Hz, 1080i-50Hz, 1080i-60Hz.

HDMI Interface with HDCP (High Definition Copy Protection) enables all-digital rendering of video without the losses.

English-13