Basic Operation - continued
PC Setup
The following items can be selected or adjusted: Horizontal/Vertical position, Clock, Phase, and Auto Program.
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button and then use D / E button to select PC Control.
Press the G button and then D / E button to select the desired picture item.
Press the D / E button to make appropriate adjustments.
Adjusts picture to left/right and up/down as you prefer.
Clock
This function is to minimize any vertical bars or stripes visible on the screen background. Horizontal screen size will also change.
Phase
Removes any horizontal noise. Clears or Sharpens text.
Auto Program
This function is for the automatic adjustment of the screen position, clock and phase. The displayed image will disappear for a few seconds while the Auto Program is in progress.
Reset
Restores factory settings.
NOTE: Some signals from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor’s H/V position, Clock and Phase manually.
| SETUP |
|
| Language |
|
| PC Control |
|
| WXGA |
|
| VGA |
|
| Child Lock |
|
| Front Light |
|
| Caption |
|
| Set ID |
|
| OK | MENU |
SETUP |
|
|
Language | 0 | |
PC Control | 0 | |
WXGA | Clock | 0 |
VGA | Phase | 0 |
Child Lock | Auto Program |
|
Front Light | Reset |
|
Caption |
|
|
Set ID |
|
|
OK | MENU |
|
English
Press the OK button to store settings.
Press the EXIT button to return to PC mode.
