NEC PV46 External Control Device Setup, Connect External Equipment, Communication Parameters

Basic Operation - continued

External Control Device Setup

Connect the RS-232 input jack to a control device (such as a computer or an A/V control system) in order to control the set’s functions externally.

Connect External Equipment

< Back panel of the set >

Y Pb Pr

(L) AUDIO (R)

COMPONENT IN S-VIDEO IN RS-232 SERVICE

Connect the serial port of the control device to the RS-232 jack on the set.

RS-232 connection cables are not supplied with the Monitor.

The Monitor remote control and front panel controls (except main power) will not be functional if the set is controlled by a PC computer or other external device.

RJ-45 8PIN CONNECTOR

NO. PIN NAME

1RXD(RECEIVE DATA)

2TXD(TRANSMIT DATA)

3NO CONNECTTION

4GND

5GND

6NO CONNCETION

7NO CONNCETION

8NO CONNCETION

Communication Parameters

•Baud rate : 4800bps (UART)

•Data length : 8bits

•Parity : None

•Stop bit : 1bit

•Communication code : HEX code

8	1
7	2
6	3
5	4

English-46