NEC PX-42XM4A, PX-61XM4A manual RGB mode prepared for the input signals listed in the table above

Model

Dots × lines

Vertical

Horizontal

Sync Polarity

Presence

Screen mode

RGB 5

frequency

frequency

Horizontal

Vertical

Horizontal

Vertical

NORMAL

FULL

DVI

Memory

select*

Signal Type

(Hz)

(kHz)

(4:3)

(16:9)

Work Station

1024×768

60.0

49.7

– –

– –

– –

– –

YES

YES*3

– –

YES

62

(SGI)

1280×1024

60.0

63.9

– –

– –

– –

– –

YES*4

YES

– –

YES

29

IDC-3000G

PAL625P

768×576

50.0

31.4

NEG

NEG

YES

YES

YES*7

YES*7

– –

NO

31

NTSC525P

640×480

59.9

31.5

NEG

NEG

YES

YES

YES*7

YES*7

640×480

NO

32

1152×864

60.0

53.7

POS

NEG

YES

YES

YES

YES

1152×864

YES

84

72.0

64.9

POS

NEG

YES

YES

YES

YES

– –

YES

85

1400×1050

60.0

65.3

NEG

POS

YES

YES

YES

YES

– –

YES

65

75.0

82.3

NEG

POS

YES

YES

YES

YES

– –

YES

71

85.0

93.9

NEG

POS

YES

YES

YES

YES

– –

NO

72

*1

Only when using a graphic accelerator board that is capable of displaying 852×480.

*2

Display only 640 lines with the screen center of the vertical orientation located at the center.

*3

The picture is displayed in the original resolution. The picture will be compressed for other signals.

*4

Aspect ratio is 5:4. This signal is converted to a 720 dots×768 lines signal.

*5

Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the

RGB mode prepared for the input signals listed in the table above.

*6

To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer's video port.

*7

Other screen modes (ZOOM and STADIUM) are available as well.

*8

When viewing a moving picture at a vertical frequency greater than 65Hz, the picture may sometimes be unstable (jumpy).

If this occurs, please set the refresh rate of the external equipment to 60Hz.

*9

CVT standard compliant.

NOTE:

•While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture or the fine picture because of errors in synchronization of your computer.

•This monitor has a resolution of 1024 dots×768 lines. It is recommended that the input signal should be XGA, wide XGA, or equivalent.

•With digital input some signals are not accepted.

•The sync may be disturbed when a nonstandard signal other than the aforementioned is input.

•If you are connecting a composite sync signal, use the HD terminal.

What is HDCP/HDCP technology?

HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI).

If you are unable to view material via the DVI input, this does not necessarily mean the PDP is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).

•“IBM PC/AT” and “XGA” are registered trademarks of International Business Machines, Inc. of the United States.

•“Apple Macintosh” is a registered trademark of Apple Computer, Inc. of the United States.

En-41