NEC PX-42XM4A manual Displaying still images in the sub screen, Switching the input source quickly

BTM LFT~TOP LFT: Will show the entire image on the sub screen of picture-in-picture mode.

Side-by-Side	Picture-in-Picture
RGB/PC1	RGB/PC1

Side-by-Side

RGB/PC1

POINTER button or

Zoom+/- button

Picture-in-Picture

RGB/PC1

	SELECT/		SELECT/
	FREEZE		FREEZE
	button		button
S BY S1		RGB/PC1	RGB/PC1
RGB/PC1	RGB/PC1
	or
S BY S2

POINTER button

Displaying still images in the sub screen

This feature enables display in the sub screen of still images captured by pressing the SELECT/FREEZE button.

Example: Setting “PIC FREEZE” to “BTM LFT”

On “PIC FREEZE” of “OPTION4” menu, select “BTM LFT”.

	OPTION 4		4 / 4
PREVIOUS PAGE
SUB . PICTURE
ZOOM NAV		:	BTM LFT
PIC FREEZE		:	BTM LFT
SEAMLESS SW		:	OFF
SELECT1		:	—
SELECT2		:	—
TEXT INSERT		:	OFF
SEL.	ADJ.		EXIT RETURN

Information

⬛PIC FREEZE Function

*This feature does not function during split screen mode.

*Digital zoom is not available while this function is operating.

*A further press of the SELECT/FREEZE button while this function is operating will cancel this function.

*Providing a 2-screen display will cancel this function.

⬛ PIC FREEZE settings

OFF: Will not show the still image.

S BY S1, 2: The still images captured by pressing the SELECT/FREEZE button will be shown on the sub screen of side-by-side mode.

BTM LFT~TOP LFT: The still images captured by pressing the SELECT/FREEZE button will be shown on the sub screen of picture-in-picture mode.

RGB/PC1 RGB/PC1

Switching the input source quickly

This feature enables quick input selection.

After setting ON, press the CLEAR/SEAMLESS SW button for quick switching between the two selected input signals.

Example: Set to switch quickly between RGB1 and RGB2.

On “SEAMLESS SW” of “OPTION4” menu, select “ON”. Select “RGB1” and “RGB2”.

	OPTION 4		4 / 4
PREVIOUS PAGE
SUB . PICTURE
ZOOM NAV		:	BTM LFT
PIC FREEZE		:	S BY S1
SEAMLESS SW		:	ON
SELECT1		:	RGB1
SELECT2		:	RGB2
TEXT INSERT		:	OFF
SEL.	ADJ.		EXIT RETURN

* The available sources depend on the setting of input.

Information

⬛SEAMLESS SW Function

*This feature will not function for certain input combinations. See the table on page En-15.

*After switching to the selected input, please operate this function.

*This feature will not function during split screen mode.

*When SEAMLESS SW is first turned on, or when signals being transmitted are changed, there may be a slight delay due to signal analysis.

⬛SEAMLESS SW settings

OFF: Turns off the SEAMLESS SW function.

ON: When the CLEAR/SEAMLESS SW button is pressed, input signals will switch quickly according to the setting of SELECT1 and SELECT2.

En-35