NEC R1000 manual Upgrade Type Comments

Enhancement Guide to Migrating from Xen Axis/Master to Xen IPK R1000

8.Assign any other required system data assignment changes and from the File menu, select Save if required.

9.Change hardware from the Xen Axis/Master system to the Xen IPK system.

Upgrade Type	Comments
Xen Axis to Xen IPK Basic Port	Replace the B48-U13 KSU hardware with the
Package	following:
	B64-U23 KSU
	CPUI( )-U( ) ETU (without PKU 192-UA)
	ESI(8)-U( ) ETU in slot 1 *
	Move all other hardware to new KSU.
Xen Axis to Xen IPK Expanded	Replace the B48-U13 KSU hardware with the
Port Package	following:
	B64-U23 KSU
	CPUI( )-U( ) ETU (with PKU 192-UA)
	ESI(8)-U( ) ETU in slot 1 *
	Move all other hardware to new KSU.
Xen Master to Xen IPK Basic	Not supported.
Port Package
Xen Master to Xen IPK	Replace the B64-U13 KSUs with the B64-U23
Expanded Port Package with	KSUs.
new Xen IPK KSUs	Replace the CPUB( )-U( ) ETU with the
	CPUI( )-U( ) ETU with PKU 192-UA.
	Move all other hardware to new KSUs.
Xen Master to Xen IPK	Replace the CPUB( )-U( ) ETU with the
Expanded Port Package without	CPUI( )-U( ) ETU with PKU 192-UA.
new Xen IPK KSUs (Retrofit)	Add Front Cover Extender [FCE-U( ) UNIT] to
	each B64-U13 KSU/E64-U13 KSU.
* The ESI(8)-U( ) or ESIB(8)-U(	) ETU

September 2003

Doc. No. 8283 - Release 1.0

Direct Download from the Installed Xen System Chapter 1 – 5