Samsung SHR-2040P/XEC, SHR-2040P/GAR System Information and Setup, Device Erase, USB S/W Upgrade

SHR-2040/2041/2042 USER’S MANUAL

System Information and Setup

●Software Version : Displays the current version. Setup is not available.

●Broadcast Format : Displays the current Format(NTSC/PAL) . Setup is not available.

●Mac Address : 6 Byte hardware address. Setup is not available.

●Device Erase

This erases the data in ATA / USB HDD / USB memory. Click the checkbox of the device that you want to erase and press “OK” You are not allowed to erase the data in Backup progress.

●USB S/W Upgrade

You can update the program by use of USB device. If there is no device, "USB S/W Upgrade fail" window pops up.

Note 1

[Internal HDD]

This is a physical hard disk connected with the IDE cable inside the SHR2040/2041/2042 main body, and stores data.

[External HDD]

This is a physical hard disk connected with the port and terminal in the back of the SHR2040/2041/2042 main body, and stores data.

This can be used as Extended HDD or Backup HDD.

-Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place of Internal HDD.

-Backup HDD : Backs up the data recorded in the set.

Note 2

[ATA]

Usage : Internal HDD

This is a physical hard disk connected with the IDE cable inside the SHR2040/2041/2042 main body. [USB]

Usage : External HDD(Extended HDD or Backup HDD)

This is a physical hard disk connected with the USB port in the back of the SHR SHR2040/2041/2042 main body,

5-7