Samsung SHR-2040P/XEC, SHR-2040P/GAR, SHR-2042P, SHR-2040PX manual To add a new DVRSHR-2040/2041/2042

!To add a new DVR(SHR-2040/2041/2042)

-If you press the [New] button, the following window will pop up where you are able to add a new DVR(SHR-2040/2041/2042) information.

1.Network Modes - LAN

-If DVR(SHR-2040/2041/2042) is connected to the LAN, set the network mode to LAN.

-If the LAN connected to DVR(SHR-2040/2041/2042) uses Static IP, select Static IP in the Address Type and input the name and IP address of DVR(SHR-2040/2041/2042).

-You should select a PORT in accordance with the PORT number set at the DVR(SHR-2040/2041/2042) network menu.

-If the Dynamic IP has been allocated for the ADSL that connected with DVR(SHR-2040/2041/2042) through the DHCP or PPPoE, select

DHCP/ PPPoE in the Address Type and input the name and MAC address of DVR(SHR-2040/2041/2042).

-You should select a PORT in accordance with the PORT number set at the DVR(SHR-2040/2041/2042) network menu.

9-50